Your tablet, now a wall panel.
Hung in the hallway or propped up in the kitchen, it shows the house as it is right now. You decide what stays front and centre.


Hung in the hallway or propped up in the kitchen, it shows the house as it is right now. You decide what stays front and centre.

At rest it becomes a soft red clock. On the nightstand, it won't keep you up.
Plus how long it took, how much energy it used and what it cost.
Cycle and finish time stay in the Dynamic Island while you get on with your day.
Charging, reduced to what matters: how full it is and when it's ready.
If the same Home Assistant also runs the office, take it out of the totals in a moment.
Smooth previews in the order you like. Live, with audio and Picture in Picture.
A code for the cleaner, valid until Friday. On SwitchBot and Nuki keypads, or with a simple link.
You decide what they can do, and when. For everything else, they ask first.
Your settings live in Home Assistant, not on the phone.
The same Domus, rethought in Material Design for phones and tablets. Download the APK
Beneath the time, a single sentence tells you how the house is doing right now. Lights, alarm, climate and energy sit alongside, updated in real time. All it takes is an iPad or an Android tablet.

Three columns, blocks you drag into place: what you actually use stays up front.
Doorbell? It shows who's there and a button to open. Alarm? The keypad appears.
With the clock showing, brightness drops, and after 5–60 minutes the screen goes dark. You pick the timing.
Big digits, clock with agenda, calendar, the state of the house, the charging car, the hourly forecast. One swipe to switch. When it gets dark, everything takes on a soft red glow.
columns, arranged your way
StandBy faces, one for every moment
then the screen switches itself off
On the Lock Screen and in the Dynamic Island you see only what counts: how full it is and when it'll be ready. With the cars and wallboxes already connected to Home Assistant.
charged, no charts to decode
the time it'll be ready
adjustable from your phone, with Face ID
Home, office, shared chargers: each with its own settings.
Domus checks the power draw and the car's status, not just whether the cable is in.
Changing the amps takes Face ID. No accidental changes.
Usage and cost worked out on your own tariff, whether flat, time-of-use or PUN-indexed. And for every room, what it really costs you.
Room by room, day by day. So you know where to act.
One Home Assistant for home and office? Exclude a device or a room and the numbers add up.
What you produce and what you use, side by side.
Alarm, gates, cameras and doorbell brought together in one app. Face ID where it counts, a single gesture for everything else.
Zones, sensors and modes are set up step by step and saved to Alarmo.
They open with a press and hold, so nothing fires off in your pocket. Try it below.
Every view on one screen, with audio and Picture in Picture. The robot vacuum map is there too.
The notification shows who's there straight away, with a button to let them in.
Temporary codes for SwitchBot and Nuki keypads, or links that need no app.
Tailored permissions and hours. Requests go straight to the parents.
Notifications and presence for each person, plus a log of what happened: gates, alarm, comings and goings.
While the cycle runs, its phase and finish time stay on the Lock Screen. At the end you get the summary: duration, energy and what it cost.
Cotton 40° · 1 h 52 min · 0.9 kWh · €0.24
the program duration
the energy used
what it cost, on your tariff
Works with washers, dryers, dishwashers and robot vacuums.
Everyday actions, wherever you need them. With the same security check.
Gate, garage, alarm and scenes from your wrist.
Pull up and open the gate from the car's screen.
Open the gate without even opening the app.
“Hey Siri, good night with Domus.”
Domus talks straight to your Home Assistant. No servers of ours in between, nobody watching.
Lights, alarm, cameras and location only travel from your phone to your Home Assistant.
Your home's data never goes through our servers.
Sign in with your Home Assistant. Zero ads, zero usage analytics.
In the Keychain on iOS, in protected storage on Android, on that phone only.
Alarm, gates, car and amps ask for your face, or fingerprint on Android.
They're saved in your Home Assistant: switch phones and find everything.
Your client never sees tokens, technical menus or fragile settings. Just their home, and you sleep soundly.
Residents only see the safe options; the rest unlocks with your PIN.
Home, office, the beach house, your clients' systems.
Low batteries, unresponsive devices, updates and backups.
Appliances, car, water, open doors, doorbell.
Zones, sensors and modes chosen with the client, written to Alarmo.
Location, presence, battery and notifications, without another app.
Your client scans, signs in and finds the home ready. Even from outside.
To print and leave with your client.
Yes. Domus is the app for the people who live in the house: Home Assistant does the work behind the scenes, on your server or a Home Assistant Green. Usually your installer sets it up.
Yes. At home it uses the local address, away from home the external address of your Home Assistant (for example Nabu Casa or your own domain). It switches automatically.
No. You sign in with your Home Assistant username and password, or by scanning the QR code sent by whoever set up the home.
Yes: it's the same app as on iPhone, in Material Design, for phones and tablets, in landscape too. For now you install it from the APK; the Play Store comes later.
Yes, an iPad or an Android tablet. You arrange the three columns, at rest it becomes a StandBy clock that turns red at night, and it wakes by itself when the doorbell rings or the alarm goes off.
Yes. 1.2.1 is in beta, and 1.2.0 is on the App Store. It's ready for everyday use, and fixes come out often. If something isn't right, write to [email protected].
Nothing. Domus is free on iPhone, iPad, Apple Watch and Android.
iPhone, iPad, Apple Watch and Android · Beta 1.2.1